Price from:
$680 .04 MT
Direct debit price
Excludes gst, and freight & handling charges
$680 .04 MT
Direct debit price
Excludes gst, and freight & handling charges
Analysis
N
0.0
P
5.5
K
14.7
S
13.2
Mg
0.0
Ca
12.4
Trace Elements
Product Description
Lucerne Mix + TE is made up of Superphosphate, Sulphur Super 30 and Potassium Chloride, with a small quantity of boron (as Borate 46) and sodium molybdate.
As a blended product, the appearance of Lucerne mix is based on the specific products used: superphosphate and sulphur super 30 are usually grey through to brown; while potassium chloride can be reddish-pink, white or grey.
Why Use Lucerne Mix + TE
- Contains the essential trace elements for healthy lucerne production
- Replaces some of the nutrients, as well as supplying some of the sulphur in the elemental form
- Use only once every 2-3 years, to ensure there is no oversupply of trace elements to the lucerne crop
Safety Information
Caution When Mixing
Although Lucerne Mix + TE generally mixes well with other products, it is not compatible with the following:
Urea or Magnesium Oxide
Lucerne Mix + TE can be compatible with the following under certain circumstances:
Flexi-N (magnesium coated Urea), Ammonium Sulphate Granular, Potassium Nitrate, Ammonium Nitrate, Mono Ammonium Phosphate (MAP), Cropmaster DAP or Calcium Ammonium Nitrate (CAN)
Segregation may occur when mixed with product with differences of particle size.
Refer to Compatibility chart.
Order Now
Phone
To order this product contact the customer centre and place your order.
0800 100 123
Online
To order this product online, login to My Ravensdown and place your order
Login to My RavensdownProduct Sizes available
Delivery Options
Compatibility
Important Information
-
BENEFITS
Contains the essential trace elements for healthy lucerne production
Replaces some of the nutrients, as well as supplying some of the sulphur in the elemental form
Use only once every 2-3 years, to ensure there is no oversupply of trace elements to the lucerne crop
Lucerne Mix + TE is used in relation to the harvesting of Lucerne. This is because harvesting results in the removal of large quantities of nutrient, with potassium removals being greatest. Lucerne Mix + TE helps to replace some of the removed nutrients, as well as supplying some of the sulphur in the elemental form. -
USES
Lucerne Mix + TE contains the essential trace elements for healthy lucerne production. However it is important to note that in many instances these trace elements do not need to be applied annually as this will depend on the soil type and local climatic conditions. If the trace elements are not required, then these can be left out.
-
APPLICATION
Lucerne Mix + TE is typically applied at 250kg/ha, as required. At this rate, 6.25kg Borate 46 and 125g sodium molybdate are applied. Use only once every 2-3 years, to ensure there is no oversupply of trace elements to the lucerne crop.
Actual spreading rates will vary according to farm type, climate, productivity and soil type. Soil testing and fertiliser plans are available to ensure you use the right product at the correct rate. Call our Customer Centre for information.
As with most solid fertilisers, Lucerne Mix + TE can be stored over a season as long as it is kept in a cool, dry, well ventilated area.