Cropmaster 11

Important Information

• BENEFITS

  Provide nitrogen (10.8%), phosphate (12%) and potassium (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture

  A cost effective product providing readily available nitrogen, phosphate and potassium

  Has good spreading and flow characteristics

   

  Cropmaster 11 is cost effective, providing readily available nitrogen, phosphate and potassium with good spreading and flow characteristics.

    
  Cropmaster products are blends - they are made up of separate granules of each different nutrient.  Cropmaster 11 is a blend of DAP granules & chipped Potassium Chloride.  In compound fertilisers like the Nitrophoska Products range each granule contains all the different nutrients. For this reason blended fertilisers are usually a lot cheaper than compound products. 
  
  As long as the granules in the blend are of a similar size (as they are in the Cropmaster range) the is usually little difference in the performance of a compound compared to a blend. However, in some intensive production situations (e.g horticulture) small differences can be important and it may more beneficial to use a compound.

• USES

  The primary use for Cropmaster 11 is as a fertiliser to provide nitrogen (10.8%), phosphate (12%) and potassium (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture.  It can be used as an alternative source of phosphate if soil sulphate levels are high or sulphate is not required.

• APPLICATION

  Because all Cropmaster products contain nitrogen, correct calibration of application equipment is important.

  
  As with most solid fertilisers, Cropmaster 11 can be stored over a season as long as it is kept in a cool, dry, well ventilated area. Store bags in a dry place ensuring they are tightly sealed.

  
  Also, clean drills and spreaders after use to avoid corrosion.

• ARABLE

  Use as a planting fertiliser for field crops at 60-200kg/ha. Although at the higher rates it may be advisable to broadcast rather than drill the product. For process crops, rates can be much higher with an application rate of 150-625kg/ha depending on phosphate requirements. For greenfeed brassicas, an application rate of 100-300kg/ha is required. It is important to avoid seed contact. If direct drilling, use lower drilling rates (<100 kg DAP/ha). If more is required, the balance should be broadcast.

• PASTORAL

  Use as a maintenance phosphate fertiliser with an application rate of 90-200kg/ha on sheep & beef farms or to meet some of the maintenance phosphate requirements on a dairy farm, especially where strategic nitrogen is required.

  
  Actual spreading rates will vary according to farm type, climate, productivity and soil type.  Soil testing and fertiliser plans are available to ensure you use the right product at the correct rate.  Call our Customer Centre for information.